In recent years, forest tourism has been booming. On weekends or holidays, people gather with relatives and friends in the beautiful forest resort, and it has become a choice for many people to have a rest and play. However, many mountain resorts tend to have low temperatures in winter due to their high altitude and high forest coverage. The lack of heating facilities will greatly affect the experience and revisit rate of tourists.

The construction building of this case is located in the tourist resort with an altitude of about 1200 meters in Chenzhou, Hunan province. The natural scenery is beautiful, the forest coverage rate reaches 80%, the annual average temperature is 17.8℃, the average temperature in January is 5.5℃, and it is often rainy in spring.

The holiday houses in the scenic area adopt light steel structure with various shapes, which are scattered on the hillside or flat ground, and the construction area is generally about 15-30 ㎡. In view of this situation, warmtact dry-way quick heat floor heating brings the new heating solution for the forest holiday house.

Construction of the building

Because of the small area, pay attention to the utilization rate of space. If the traditional heating method is used, it is necessary to install the heat source host and water pipe and other equipment, and the construction is complex and occupies space.

Warmtact dry-way quick heat floor heating has simple structure and convenient installation. The thickness of electric heating film floor heating is only 2.5mm, which is concealed laid under the floor, without the need to backfill cement mortar, which can directly lay wood floor, does not occupy indoor space, and will not affect the decoration layout of the vacation house.

Warmtact electric heating film floor heating Dry-way quick heat floor heating

The width of dry-way heating film floor heating is 1000mm, with PVC waterproof layer, multifunctional buffer layer and independent wire, laid up very smooth, beautiful, after laying wood floor, trampling will not produce abnormal sound, feel comfortable.

Naturally, vacation homes also pay much attention to comfort and reliability. Dry quick-heat heating does not need to backfill cement mortar, which can not only save the cost and construction period, but also bring good heating experience to the residents. During the operation, with the whole ground as the heat dissipation surface, the heat through the form of heat conduction and far infrared radiation, quickly throughout the whole room, basically open for 30 minutes, you can feel warm. You can also open the floor heating in advance through the APP, warm without waiting.

At the same time, the dry speed hot floor heating is equipped with an intelligent temperature control system, which realizes automatic constant temperature and accurate temperature control. Even if the temperature outside varies greatly, the room temperature can be maintained in an ideal state. In the process of operation, there is no wind sense, no dust, the indoor temperature and humidity are balanced, as comfortable as the sun, and not too dry, bringing comfortable heating experience for tourists.

Mountain energy supply is limited, warmtact dry method of fast thermal floor heating with electricity as energy, as long as the electricity can be installed, not only a wide range of application, and green, convenient management. No regular maintenance, very small maintenance, stable heating effect, is the ideal choice for building heating in tourist resorts.